If you read our previous blog, “Moving a Safe: Important Prep Steps to Follow”, you learned the necessary prep steps to take when moving a safe. If you didn’t read it, hurry and do so before venturing further!
Now, let’s continue…
Moving a safe is a big job and should be taken seriously. You will need to have strong people to help you move it, the correct moving equipment, a plan for how to move it successfully, and a vehicle to load it onto. For optimal results, follow these important tips to move your safe:
Step 1. After prepping your safe for transport, be sure to close the door and lock it in place. If the doors to your safe accidentally open during transport, it could cause a lot of damage – to you and your helpers, to other belongings or your property, and even to itself.
Step 2. Your safe may appear indestructible, but trust us, it can be damaged during a move. This being said, use moving blankets to completely wrap your safe; ensure no parts are visible. Then, using packing tape, moving straps or rope, secure the blankets in place.
Step 3. With the help of your moving buddies, slowly tilt the safe and slide a heavy-duty dolly underneath the bottom. This step should be performed with extreme caution. One slip or misstep and someone could get hurt.
Step 4. Once your safe is on the dolly, you will need to secure it in place. Do this by wrapping the entire body of the safe with straps or rope, fastening it tightly and securely to the dolly. It is vital that the safe remains firmly attached to the moving dolly at all times, so before continuing to the next step, double-check your work.
Step 5. All of your strength will need to be used during this step, so get your muscles ready. After double-checking to ensure your safe is securely attached to the moving dolly, tilt back the two-wheeler so the full weight of the safe is balanced on the wheels.
Step 6. As you begin to slowly roll the dolly, have at least three of your helpers support the safe. You may also want to assign someone to walk a few steps ahead of you in order to warn you of potential trouble along the way (bumps, cracks, etc.). During this time, no one should make any sudden or unexpected movements. Doing so could confuse others, or even throw them off balance. Sharp turns or bumps should also be avoided if possible because it could cause the safe to fall off the dolly.
Step 7. If you’ve managed to transport your safe to the awaiting moving vehicle, you will then need to lower the loading ramp. This way you can wheel your safe up the ramp and into the vehicle where it will remain until arriving at your destination.
Step 8. After loading the safe, strap it against one of the vehicle’s sides, securing it as tightly as possible. Remember, the more securely you strap your safe to the inside of your moving vehicle, the better the chance it will survive the many bumps and turns on the road. Be sure to use as many straps and ropes as necessary to achieve complete immobilization during transport.
Step 9. Once arriving at your new home, you will need to repeat the above steps in reverse order.
Don’t forget. Safety is your number one priority when moving a safe. If you are not 100% certain you are up to the challenge, turn to experienced professionals that can help you get the job done.
For more moving tips and tricks, click here.